Products >Cherry Blowers >Cherry Blowers

  Add to Favorites Print Page
Cherry Blowers Cherry Blowers
Turbo Mist

1-800-495-6145
 
Frame Carbon Steel Tubing 2" x 8"
 

TURBO-MIST CHERRY BLOWER

 

The Turbo-Mist Cherry blower is designed to offer the ability to blow the moisture off of the cherries to prevent splitting due to rain just prior to picking.

 TWO MODELS OFFERED:

S30PM55 This model utilizes the same fan and gearbox (Bima M55) as the S350 series sprayers. We therefore generate the same air volume and air speed as our S350 series sprayers, and do it while requiring only 55 horsepower on the PTO.   Air volume is 25,551 CFM

S30PM60 This model has the M60 Bima gearbox, which turns our 30-inch turbine at 540 RPM’s more than the M55 model. The result is increase air volume, coupled with larger rear outlets, this model will generate about 73% more air volume than the standard M55, however, be aware it requires a minimum of 75 Pto hp to crank the turbine at this speed.   Air volume is 36,265 CFM

We recommend you have 75-80 Pto horsepower for the M60 model

Specifications:

Frame:        8 1/2” x 2” steel tubing. 

Turbine:      30 inch Turbomist Drive: Heavy-duty two speed gearbox with neutral position.  Fan attached directly to output shaft.  Heavy duty American made Weasler PTO Shaft connects the tractor to the gearbox.

The overall length of either unit is 5 feet 2 inches. Both models have an aluminum cover to prevent intake of tree branches due to suction produced by the fan.

cherry_blower.jpg

 
Turbomist Superiority

 

  Measurements in Inches

Width .......... "
Height ......... "
Length ......... 5'2"
 
 
AVAILABLE OPTIONS
 


2 inch Receiver hitch for 250 Series sprayers
Details

 
 
 
  Add to Favorites Print Page