Heavy Duty (HD)
Specifically designed for large growing applications, these units are structurally built for the additional weight of our attachments to increase productivity. This sprayer is designed to manage the same and larger acreage as our Standard Duty Series, and works faster to result in less wear and tear on equipment due to the larger tank sizes and increased spray capacity.
Standard Duty (SD)
Our Standard Duty series offers a more compact sprayer built with the same quality, reliability and features of our market-leading Heavy Duty series, with smaller turbine and tank sizes.
Light Duty (LD)
Trailer + 3-Point Hitch Models
Our smallest and lightest sprayer is designed for operational and cost efficiencies in the hobby farm and small-scale operation category.
Designed for mature blueberry plantations to direct spray laden air to the top of the plant. Used in conjunction with our traditional air outlets, this system improves coverage both on the inside and the outside of the blueberry bush by pushing down through canes into hard-to-reach areas deep within the bush.
Designed narrow and tall to spray in tight growing conditions, the Scorpion tower is designed for maximum versatility. Whether you’re spraying a 12 or 8-foot drive, this height-adjustable attachment offers even airspeed through the opening and hits your target where you need it. Additional openings available to maximize air volume.
High Density Tower Family
Our high density towers are designed to reduce drift and accommodate tight planting conditions. These stainless steel towers are adjustable for air direction and angle to ensure effective tree coverage. Tower configurations are available for young to adolescent peach trees, standard cherry trees, nuts and grapes.
Requiring only 35hp, these units are a fixed style designed to give coverage tight to the machine. Available in either short or tall configurations to suit a variety of crop applications with a reach of 60 to 90 feet.
Designed with an additional set of spray outlets high in the top trellis to allow for full canopy penetration. This tower directs air up and into difficult spots while utilizing either traditional round outlets or our low drift tower on the bottom outlets. Achieve amazing coverage from top to bottom with less horsepower.
With this attachment, increase the functional spraying height of the sprayer while retaining the left and right traditional pattern and optimizing coverage by pushing more air vertically. Maximize your sprayer investment. Built to clear debris in the weed spray area. Multi-task by blowing both sides of the drive row at the same time.
Maximize your sprayer investment. Built to clear debris in the weed spray area. Multi-task by blowing both sides of the drive row at the same time.
Under Vine Blower
Designed with the grape grower in mind, this unit complements the Grape Tower to provide complete coverage. Units come with adjustable wings, air vanes, and adjustable nozzles in the air stream.
Designed to ensure exceptional grape quality. Accommodates single drive row or multi row through controlling the direction of sprayer outlets. Optional spray outlet adjustable arms. Combine with Under Vine Blower to spray from above and below for complete coverage.
Designed for flexibility. With adjustable top outlets and additional individually controlled side outlets, this tower can be unbolted from its frame or folded over the tank with an optional hydraulic fold kit. With rear attachable jacks for storage, this tower is accommodating to your needs on and off the field.
Our Specialty Products are designed for optimum performance.
We offer stainless steel Nurse Tanks ranging from 800-1,200 US Gallons. Our Nurse Tanks are available in both Skid and Trailer models.
Our Utility Sprayers are geared towards the home hobbyist, smaller or commercial acreages that don’t require the tank capacity or specifications offered by our Light Duty, Standard, or Heavy Duty Turbo-Mist™ Sprayers. Our Sprayers can be used to spray weeds and are compatible with the use of herbicides. All utility sprayers are PTO or hydraulic driven.
Multi-Row Sardi Sprayer
The V Series Sardi Multi-Row Airblast Sprayer allows configurations to spray two or three rows simultaneously. This sprayer utilizes an axial flow Sardi fan to produce large volumes of low velocity air to give the best coverage with low power inputs. This Sprayer provides superior coverage, resulting in optimization of operations and time savings. The design of the Sprayer allows you to operate in close proximity to the target, reducing spray drift. Enjoy fuel savings from reduced horsepower requirements and labour savings from optimized coverage.
Fruit Dryer Fan Base
Our PTO powered Fruit Dryer Fans offer the ability to remove moisture and prevent splitting without damaging fruit. Available in two models with three different heads to suit different fruit drying applications, the Dryers use the same fan and gearbox as our Heavy Duty (HD) Turbo-Mist™ series, generating significant air volume while requiring minimal horsepower. All units offer the ability to target the airflow into specific areas to maximize their effect. Available in wheeled or 3-point hitch models.
Standard (SD) Fruit Dryer Base – 30″ (S30PM55)
This model combines a 30” Fruit Dryer Fan base with a Standard Head. This unit offers diverse product customization, as it is compatible with other Attachments in the Turbomist Product Catalogue.
Heavy Duty Base (HD) Fruit Dryer Base – 38″ (S38PM55)
Our largest and most powerful Fruit Dryer Fan, the 38-inch turbine generates 57% more air volume than the standard model. Built specifically for the needs of the larger fruit grower, this model is not compatible with additional attachments or customization. Note: this model requires a minimum of 80 PTO horsepower.
Leaf + Berm Blower
Our Ground Level Blowers are built to blow grape berms and leaves from the base of trees. They are used to clear debris in the weed spray area to ensure you maximize your spray coverage. This unit allows you to multi-task by blowing both sides of the drive row at the same time.
Fruit Dryer Heads
Our Fruit Dryer Heads attach to the SD and HD Bases to provide crop-specific coverage that suits the unique needs of different growers. All SD Fan Bases come equipped with a Standard Head.
The Standard air delivery head is included with the purchase of all Fruit Dryer Fan Bases. It provides air over a 180-degree target area from left to the right side of the drive row. Available in both 30” and 38” diameter.
The Cherry Head air delivery system is designed specifically to direct air to match the fruit growing area. Available in both 30” and 38” diameter.
The Grape Head air delivery system is designed to target the specific fruit growing zone in vineyards. Available in both 30” and 38” diameter.